Elitech WJL-6000S Refrigerant Halogen Leak Detector HVAC Freon R134a R410a Test

• Popularity - 20883 views, 2983.3 views per day, 7 days on eBay. Super high amount of views. 558 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Elitech WJL-6000S Refrigerant Halogen Leak Detector HVAC Freon R134a R410a Test<br>Elitech WJL-6000S Refrigerant Halogen Leak Detector HVAC Freon R134a R410a Test<br>WJL-6000S is a corona leak detector with high sensitivity and visualized alarm display. Its adjustable sensitivity ensures automatic and optimal detection status， locating leaks much more accurate. Its subtle structure, built-in high-precision stabilivolt IC and ultra-low power consumption circuit design enable much more stable operation and endurable batteries.<br>Key Feature:<br>Upgraded 5 LED indicators reflect gas concentration.<br>Freon leak detector triggers on R22, R134A, R404a, R410A and all halogenated refrigerants including HFCs, CFCs, HCFCs, and blends.<br>7 Adjustable Sensitivity; Maximum sensitivity is 0.21oz/yr.<br>Response within 3 seconds; Warm up in 6 seconds; Audible alarm and low battery indicator.<br>A flexible probe around 7.8-inch allows detections in difficult and hard-to-reach areas. 24/7 US Technician Support via Email and Phone.<br>Concentration Indicator<br>Once leaking gas is detected, the beep frequency will increase. The more gas leaked, the quickly the buzzer beeps. The first indicator will flash quickly meantime and the other four LEDs will light up accordingly based on the concentration of leaked gases.<br>The first indicator indicates both leak and battery level. Blinks in orange mean low battery.<br>Corona Sensor<br>It will respond to all halogenated. This includes, but is not limited to:<br>CFCs e.g.R12, R11, R500, R503 etc.<br>HCFCs e.g. R22,R123, R124,R502 etc.<br>HFCs e.g. R134a, R404s, R125 etc.<br>Blends such as AZ-50. HP62. MP39 etc.<br>7 Adjustable Sensitivity<br>1-7 Grade selectable sensitivity<br>Maximum sensitivity is 0.21oz/yr<br>smaller leak, higher sensitivity grade<br>More refrigerants, more rapidly beeps, faster indicator flashes<br>Note: 2 beeps per second when the detector is open, 10 beeps per second when leak is detected)<br>Audible and Visual Alerts<br>LED light flash alarm<br>Buzzer alarm<br>Dual-battery indicators<br>Green-the battery voltage is normal, suitable for the job.<br>Orange-the battery voltage is close to the limit work, need to be replaced asap.<br>Flexible Probe<br>Around 7.87-inch flexible probe<br>Allows detection in difficult and hard-to-reach areas.<br>Replaceable sensor tip, which makes the detection more accurate.<br>4AAA Batteries<br>Battery life: about 50 hours<br>Leak Detector equips with:<br>Compact design<br>Portable black bag to carry and storage<br>Note: batteries NOT included<br>Applications:<br>The WJL-6000S may also be used to:<br>Detect leaks in other systems and storage/recovery containers. It will respond to all halogenated (contains Chlorine of Fluorine) refrigerants. This includes, but is not limited to:<br>CFCs e.g. R12, R11, R500, R503 etc..<br>HCFCs e.g. R22, R123, R124, R502 etc...<br>HFCs e.g. R134a, R404s, R125 etc...<br>Blends such as AZ-50. HP62. MP39 etc...<br>Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas).<br>Detect SF-6 in high voltage circuit breakers.<br>Detect most gases that contain chlorine, fluorine and bromine (halogen gases).<br>Detect cleaning agents used in dry cleaning applications such as perchloroethylene.<br>Detect halogen gases in the fire-extinguishing system.<br>Technical parameters:<br>Operating temperature: 0~52℃ (30℉ to 125℉)<br>Maximum sensitivity: 6 gr/yr, for all halogenated refrigerants<br>Battery life: Approximately 50 hours normal use<br>Response time: Instantaneous<br>Work mode: continuous, no limitation<br>Fixed probe length: 20cm<br>Unit dimensions: 22.9cmx6.5cmx6.5cm<br>Warm-up time: approximately 6 seconds<br>Reset time: two to ten seconds<br>Power supply: 4*AAA batteries<br>Shipping<br>We will ship all items within 3 working days once payment finished,<br>We always ship items by USPS First Class, FedEx is the Expedited Shipping choice.<br>Sometimes international's delivery is highly dependent on the courier company and local customs/d