7" 8G 1080P 4K Touch Screen IP Analog Camera CCTV Tester Monitor CVBS HDMI WIFI

Description

Product Description
The 7 inch touch screen IP camera monitor is designed for maintenance and installation of IP cameras, analog cameras, as well as testing 4K H.264 /4K H.265 camera via mainstream, The 1280x800 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. The combination of touch screen and key buttons make the IP camera tester very user-friendly.
The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP address searching. Test LAN cable for proper connection termination. Other functions include providing 24W PoE power to your camera, HDMI OUT, CVBS loop test, testing IP and analog at the same time, LED Flashlight, DC 12V 2A power output and much more. Its portability, user-friendly design and many other functions make the IP tester an essential tool for all installers or technicians.
Note:
The tester is
only
compatible with
IP/CVBS
cameras, any other type is not supported!
Specifications:
Brand:SEESII
Model: 9800Plus IP Camera Tester
Display: New 7 inch IPS touch screen cctv tester ,1280*800 resolution
Network Port: 10/100/1000M auto adjust, RJ45
WIFI: Built in WIFI,speeds150M, allows you to connect to a wireless network and
view IP cameras
H.265 Mainstream Test: New hardware decoding,4K,H.265/H.264 camera image display by mainstream testing
IP Discovery: Auto-scan the whole network segment camera IP
Rapid ONVIF: Search camera quickly, auto log in and display image from the camera, activate Hikvision camera
Hik Test Tool: Activate Hikvision camera, display image from the camera, modify IP, user name and password parameters etc
DH Test Tool: Dahua camera test, modify IP, user name and password parameters etc
IP Camera Type: ONVIF,ONVIF PTZ, Dahua IPC-HFW2100P, Hikvision DS-2CD864-E13,
Samsung SNZ-5200, Tiandy TD-NC9200S2, Kodak IPC120L, Honeywell HICC-2300T, RTSP Viewer
Analog Video Test: 1 channel BNC Input & 1 channel BNC Output , NTSC/PAL (Auto adapt)
Video Level Meter: PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement for cvbs camera.
Zoom Image: Supports Analog and IP camera image zooming & movement
Snapshot, Video Record and Playback: Capture current images and record live video as JPG file. Media player will view photos and playback video
HDMI Output: 1 channel HDMI output, supports up to 1080p
RJ45 Cable TDR Test: RJ45 cable TDR test and cable quality test, to test cable pair status, length, attenuation reflectivity, impedance, skew and other parameter.
12V/2A Power Output: Output DC12V/2A power to camera
USB 5V Power Output: 5V 2A power output only ,NO data
PoE Power Output: 48V PoE power output, Max power 24W
Screen Management: Lite mode and normal model available. Under normal mode, you can change icons sequence and self-define the number of icons in each page
Theme: Self-define icons, desktop and application interface background, modify
interface sliding effect
Drop-down Menu: PoE power switch ,IP setting, WLAN switch , HDMI OUT functions etc screen lock, password lock screen or pattern lock
Audio Test: 1 channel audio signal input and 1 channel audio signal output to connect headphones
PTZ Control: SupportRS485 control, Baud 600-115200bps, Compatible with more than
30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc
Color Bar Generator: Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP Cable Tester: Test UTP cable connection status and display on the screen. Read the number on the screen
Data Monitor: Captures and analyzes the command data from controlling device, also can send hexadecimal
Network Test: IP address scan, link scan, and Ping test. Quickly search the for IP camera‘s IP address on your network
PoE /PSE Voltage Test: Measures PoE switch voltage and displays pin configuration
Power:
External Power Supply: DC 12V 2A
Battery: Built-in 7.4V Lithium polymer battery ,5400mAh
Rechargeable: After charging 5~6 hours, normal working time 10hours
Parameter
:
Operation Setting: Capacitive touch screen, OSD menu, select your desired language: English, Chinese, Korean, Russian, Italian or Polish, etc
Auto off: 1-30 (mins)
General:
Working Temperature: -10℃---+50℃
Working Humidity: 30%-90%
Dimension/Weight: 240mm x 154mm x 46mm / 830g
Packing list:
1x SEESII 9800PLUS Tester
1x Adaptor DC12V 2A
1x Network Cable Tester
1x BNC Cable
1x RS485 Cable
1x Output Power Cable
1x Audio Cable
3x Band
1x Tool Bag
1x Manual
On Jul-27-21 at 21:37:06 PDT, seller added the following information: